Revit MEP (Comprehensive)

Sale!
Placeholder

$308 $205

Category:

Revit MEP (Comprehensive)

COURSE CONTENT

About This Course

Taking an online course in Revit MEP enables design engineers and modellers across mechanical, electrical and plumbing (MEP) disciplines to create a detailed building services model. Using Revit, multi-disciplinary collaborative design and parametric equipment families can be created by design engineers.

Also, MEP modellers can create detailed HVAC, mechanical piping, electrical lighting and containment, public health and drainage models by enrolling for this online course in Revit MEP. Further, they can create detailed MEP legends and installation details and can extract BOQ (Bill of Quantities) and final documents. After completing this Revit MEP training course, students and professionals can apply for MEP jobs with designations such as Revit modellers or MEP coordinators.

Future Scope of This Course

After completing this Revit MEP training course, students and professionals can apply for MEP jobs with designations such as Revit modellers or MEP coordinators. These designations involve the following responsibilities:

  • Work with high-calibre MEP (mechanical, electrical, plumbing) professionals, including 3D spatial MEP coordinators, MEP Revit designers, 3D MEP modellers, etc., on a variety of MEP BIM, Revit and CAD design development projects for the commercial, residential, hospitality, healthcare and retail sectors
  • Create detailed MEP drawings/plans/sections or models, using Revit. Include vital information in the 3D MEP model, such as mechanical pipework for heating and domestic water supplies, gases and drainage systems that are used during the final construction.

Who Can Take This Course?

This Revit MEP training course is suitable for mechanical engineers, electrical engineers, MEP draftsmen and firefighting and plumbing design professionals.

Course Content

Below are the topics covered in the course Revit MEP (Comprehensive)

Sr.  No Topic / Sub Topic Total Course Duration
23 H : 15 M : 41 S

0Overview00.02.01

0.1WelcomePreview02.01

1.0Introduction to Autodesk Revit MEP00.06.54

1.1Introduction and Understanding GUIPreview6:54

2.0Starting New Project01.30.02

2.1Working with Project Templates13:54

2.2Setting Up Units and Keyboard Shortcuts3:18

2.3Revit Element Properties9:52

2.4Understanding View Properties9:18

2.5Working with Visibility/Graphic Overrides14:42

2.6Creating and Managing View Templates(Floor Plans)11:10

2.7Creating and Managing View Templates(Elevations and Sections)17:46

3.0Working with Datum Elements00.25.39

3.1Adding Levels13:54

3.2Editing Levels and Adding Grids13:18

4.0Linking and Importing CAD00.36.23

4.1Linking CAD Drawing14:20

4.2Managing CAD Link11:19

4.2Importing CAD Drawing10:43

5.0Linking Revit00.10.43

5.1Linking Architectural Revit Project10:43

Practical Session–

Test–

6.0HVAC Systems03.05.17

6.1Starting a Mechanical Project11:52

6.2Creating Duct Routing Preferences14:28

6.3Adding Duct System Types10:34

6.4Creating Duct Route15:16

6.5Creating Vertical Ducts and Connection at Junctions16:13

6.6Creating various Duct Connections12:06

6.7Adding Mechanical Equipment15:06

6.8Adding Insulation and Lining9:23

6.9Adding Duct Accessories11:58

6.10Adding Air Terminals18:19

6.11Connecting Air Terminals15:14

6.12Heating and Cooling Loads17:00

6.13Creating an Autoroute Solution17:42

Practical Session–

7.0Hydronic Piping Systems01.05.44

7.1Creating Pipe Routing Preference10:45

7.2Adding Pipe System Types11:30

7.3Creating Mechanical Pipe Route12:45

7.4Placing Radiant Panels18:20

7.5Adding Insulation and Pipe Accessories12:21

Practical Session—

8.0Plumbing Systems02.01.43

8.1Starting a Plumbing Project07:44

8.2Creating Pipe Routing Preference and System Type for Sanitary Pipes10:01

8.3Creating Drainage Pipe Route20:29

8.4Creating Vertical Stack and Vent Pipes19:11

8.5Adding Plumbing Fixtures12:59

8.6Connecting Plumbing Fixtures21:07

8.7Creating Domestic Water Pipes16:57

8.8Connecting Plumbing Fixtures to Domestic Water Pipes13:11

Practical Session–

9.0Electrical Systems01.08.09

9.1Starting an Electrical Project11:15

9.2Creating Cable Tray Route17:50

9.3Adding Lighting Fixtures and Lighting Devices10:55

9.4Adding Electrical Equipments and Creating a Circuit15:10

9.5Creating Wires and Conduits12:28

Practical Session–

10.0Fire Fighting Systems00.23.56

10.1Adding Sprinklers10:15

10.2Creating Fire Fighting Pipe Route13:40

Practical Session–

Test–

11.0Annotation Construction Documents01.29.34

11.1Introduction to Dimensions15:08

11.2Working with Dimensions18:51

11.3Creating Dimension Style11:22

11.4Creating Drafting View22:38

11.5Creating Duct and Pipe Color Fill Legends21:33

12.0Tagging 01.07.25

12.1Working with Tags16:17

12.2Creating Duct and Pipe Tag Family21:46

12.3Creating Cable Tray and Lighting Device Tag Family18:37

12.4Using Multi Category Tag10:43

Practical Session–

13.0Bill of Quantities00.57.27

13.1Creating Duct Fitting Schedule15:49

13.2Creating Pipe Fitting Schedule16:45

13.3Creating Panel Schedule18:51

14.0Views Setup01.07.28

14.1Adding Filters 17:29

14.2Creating Legend and Callout View 17:57

14.3Adding Scope Box 17:33

14.4Working with Underlay objects 14:28

15.0Sheet Composition01.07.28

15.1Adding Sheets and Setting Up Views 22:21

15.2Adding Revisions to Sheet 21:15

15.3Creating a Sheet Family 26:41:00

Practical Session—

Test—

16.0Managing Project01.29.24

16.1Object Styles and Transfer Project Standards 17:35

16.2Creating Shared Parameters and Project Parameters 21:06

16.3Using Shared Parameters in Tags, Schedules and Filters 12:22

16.4Creating Global Parameters 13:14

16.5Managing Additional Settings 25:05:00

17.0Phasing and Groups00.36.41

17.1Creating and Managing Groups15:09

17.2Working with Phases21:32

18.0Exporting Views and Sheets00.31.51

18.1Overview to various Export Formats11:22

18.2Exporting Revit Views to CAD format 20:29

19.0Plotting00.15.33

19.1Printing and Plotting Sheets15:33

Practical Session–

Test–

20.0Family Concepts & Techniques02.45.57

20.1Introduction to Families and Forms12:33

20.2Creating an AHU Body 21:01

20.3Placing Duct Connectors 25:05:00

20.4Placing Hydronic Pipe Connectors 28:34:00

Practical Session–

20.5Creating Vertical and Horizontal Unistruts 17:53

20.6Creating Frame using Unistruts-I18:35

20.7Creating Frame using Unistruts-II19:00

20.8Creating Module Frame 23:13

Practical Session–

Test–

21.0Project Team Collaboration1.11.27

21.1Creating a Central File23:00

21.2Working in Local Files-I28:02:00

21.3Working in Local Files-II20:24

Practical Session–

Test–

22.0Closure00.01.54

22.1Closure01:54

Recommended Courses

Below are a few additional courses you may like to explore.

Total Page Visits: 213